cleaned off an oil from metal, and made own pimpel
Looks like it works now, but need to adjust size of pimpel.
Removed one wire and another one leaved inside, to keep it stiffer
Beiträge von edgars
-
-
there is a little bit of grease , will try to clear it
I cant understand about pimpels
1) is it in correct place or i should move it to other screw?
2) Is missing pimple same as existing one? Or it should be different (harder, longer, etc)? -
Looks like, there is something wrong. Missing one pimpel, and current is in wrong place?
-
Yupp, arm goes up, after come click it goes down, clicks, then goes up, clicks and down, infinite loop
I will try on wedbesday, will have a free evening.
And start is not working too.Btw, in that video there is one more pimpel or something like that. IIRC i have only 1 pimpel.
-
and turntable is disassembled
-
This happens at the end of record. Repeat is ON. If i press STOP situation is same or even needle can drop on paper.
https://share.icloud.com/photos/0xiymfLLoSrxpAHQMu_03Njng
Sorry for bad quality video, made with front camera, main camera have a defective stabilizator.
-
with old pimpel i was not able to play records, tonearm was unpredictable.
With new pimpel i can normaly play, but tonearm does not returns to start of record or to "Liftbank" -
Hi!
Are you sure its pimpel? I replaced it, and now tonearm is normaly moving from mount to record. With old pimpel tonearm was moving very randomly -
Hello
Im back with next thing to fix on my CS 601. So, when record ends, tonearm lifts up and thats all. Some days ago it tried to go back, but dropped as stone on the last track, played till the and same shit again, UP, a little bit back, fall as a stone on the last track in random place.
As i understand this is not easy fixable.
-
SO...
Today i opned turntable, checked all connections and MAGIC... grounding Marantz - Rega phono works like a charm! ;D -
Cable is completely replaced. So i will just connect cable to back of the board and will see if it changes something or no
-
Default plug is DIN, but it's replaced with RCA by previous owner.
-
I see! Sure, i can open turntable. Will do it tomorrow
-
Well, that is exactly what i want to do. But since cable is removed, i am not sure where should i re-solder it
-
Coleague have a DIN table and amp
So, where should be a ground cable connected? -
Second turntable ...: D
I will give it to coleague, he have a dual also -
Hello,
On my CS 601 grounding cable is connected to Canton cleaning "arm". Everything is fine, while turntable is connected to marantz onboard phono and marantz ground. When i connect turntable to rega fono a2d phono and its ground screw, i have unbelievable level of HUM. How to fix it?
-
Okey, i see, AT-VM95ML
-
I already have a M20E, but im not sure about condition
-
Hello
Which are recomended cardtridges for CS601 under 150EUR?